单项选择题
An administrator has implemented the following LPARs on a Power 570 with 32 GB memory with 512 MB remaining for allocation： LPAR 1 memory ： min = 10 GB des = 15 GB max = 24 GB
LPAR 2memory ： min = 10 GB des = 15 GB max = 24 GB The administrator receives a request to add 2 GB to LPAR 1. The only way to do this is by moving memory from LPAR 2 to LPAR 1. The administrator attempts to move the memory， but the operation fails. The administrator can
however allocate 512 MB that is free to LPAR 1 on the 570.
What is the most likely cause of this failure when dynamically moving memory？（）
A. Maxperm% is set too low on LPAR 2
B. Insufficient paging space on LPAR 1
C. Service IBM.DRM is unavailable on LPAR 1
D. Insufficient pinnable memory frames available on LPAR 2
相关考题
-
单项选择题
Whatdoesthe"allowperformanceinformationcollection"buttondointheHardwareManagementConsole（HMC）GUI？（）
A. It allows you to get inter partition reports， or cross partition performance activity.
B. It will allow IBM remote technical support to get performance information from the machine.
C. It is effective only on POWER6 and when Live Partition Mobility operations are planned.
D. It will start standard performance monitoring tools when an LPAR boots up， the output will be saved to the /etc/perf directory by default. -
单项选择题
An administrator has installed 1 VIO Server and 5 client LPARs on a 16-core Power 570 with the following CPU requirements： Virtual Processors Processing Units Min Desired Max Min Desired Max VIOS1 1 2 4 0.1 1.0 2.0 LPAR1 4 4 4 4.0 4.0 4.0 LPAR2 2 5 8 1.0 5.0 6.0 LPAR3 1 3 4 0.1 0.3 1.0 LPAR4 3 6 9 0.5 3.0 6.0 LPAR5 1 3 6 1.0 3.0 .06 If the administrator activates the LPARs in the above order， what will be the result？ （）
A. All LPARs will start except LPAR5.
B. All LPARs will start with desired capacity.
C. All LPARs will start but LPAR5 will have its minimum capacity assigned.
D. All LPARs will start but LPAR5 will have less than its desired capacity. -
单项选择题
After rebooting one Virtual IO （VIO） server in a redundant environment， the following command output from the client partition shows that the path to the shared disk from the rebooted VIO server remains in a failed state. Vio_client1# lspath Failed hdisk0 vscsi0 Enabled hdisk0 vscsi1 What must the administrator do to ensure that the path is automatically restored when a VIO server is brought back into service？ （）
A. On both VIO servers， modify the inittab making chdev the last command， so that they will start during VIO server reboot.
B. On both VIO servers， change the following parameters and reboot each of them in turn hcheck_interval =60 hcheck_mode=interactive
C. On client logical partition， modify the inittab making chdev the last command， so that they will start during client partition reboot.
D. On the client logical partition， change the following parameters and reboot the client hcheck_interval =60 hcheck_mode=interactive
