单项选择题
Mike, a technician, is working on a computer and the air is dry. Which of the following choices is the BEST option for Mike to use?（）
A. Use a portable anti-static pad and wrist strap, ensuring all components remain on the mat, and the wrist strap is connected to the mat.
B. Leave the computer plugged in and running, to stabilize the power, and keep one hand on the case at all times while working on the unit.
C. Use a wrist strap, connecting it to the computer case. Leave the computer plugged into the outlet for grounding.
D. Advise the customer it is best if the computer is taken back to the shop for repair, so it will be in a controlled temperature environment.
相关考题
-
单项选择题
The customer brings their mini-tower and a new DVD/RW drive they want installed. The technician finds a second hard drive in an empty 5.25 bay connected to the secondary bus and jumpered as a slave. The ribbon cable will not stretch from the primary hard drive to the open 5.25 inch bay. Which of the following is the BEST solution?（）
A. Connect the new DVD drive as the primary on the secondary bus and leave the old CD drive disconnected.
B. Move the secondary hard drive next to the primary hard drive and connect to the primary bus. Connect the new DVD drive as the slave on the secondary bus.
C. Move the secondary hard drive from the secondary to the primary bus and then reformat the hard drive after rebooting then reassign the drive letters in disk management prior to installing the new DVD drive on the secondary bus.
D. Move the secondary hard drive to the bay and then connect it to the primary bus. Connect themini-tower and the new DVD drive as the master on the secondary bus. -
单项选择题
Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）
A. The new drive’s jumper is set for master.
B. The new drive is connected to the secondary bus as a slave drive.
C. Both drives’ jumpers are set for cable select.
D. The old drive’s jumper is set for master and the new drive is set for slave. -
单项选择题
When using Device Manager, a red ‘X” indicates which of the following?（）
A. Device is disabled
B. Device conflict
C. No device driver found
D. Device has not been digitally signed
