单项选择题
An xSeries specialist monitors a customer’s server that has poor performance. The customer is running an x365 with a ServeRAID 6i controller with write-back cache turned on and ten 15K rpm drives in a RAID-5 array. It is a mission-critical server and must have a redundant storage system. Performance tests indicate that the Average Disk sec/Transfer exceeds 20 ms. Which of the following is the lowest-cost method to increase the throughput？（）
A.Disable the ServRAID cache
B.Change the RAID level to 10
C.Change the cache level to Write Through
D.Add five more drives to the array to increase the number of read/write heads
相关考题
-
单项选择题
Acustomerwantstocreatebackupsataremotelylocateddatacenter.Priceandperformanceareofprimaryimportance，sobackuptodisksattheremotelocationisselectedinsteadoftape.Theremotelocationis1KM（0.6Miles）awayfromthedatacenter.NASisthesolutionbeingconsidered.Whichofthefollowingisthebenefitofthissolution？（）
A.NAS runs on 2Gb fibre， which will provide better performance.
B.NAS uses WAN infrastructure， which can easily span the 1 KM gap.
C.NAS requires fibre storage， which allows dual paths for redundancy.
D.NAS requires iSCSI routers and offers better growth environment. -
单项选择题
AttachingtoaSCSIstoragesystemthroughredundantpathswillprovidewhichofthefollowing？（）
A.The ability to interleave writes to the array
B.High Availability and failover
C.LUN sharing via Target Mode SCSI on the storage system
D.A greater number of LUNS available on the same storage system -
单项选择题
Acompanyinstalledanewservertomanageitselectronicimagestorage.Theyhavetwodistinctimagesizes：2KBand16KB.TwodistinctarraysarecreatedonaServeRAIDadapter.Thefirstarraywillstoreallofthe2KBimages，andthesecondarraywillstoreallthe16KBimages.TheRAIDstripesizewasleftatthedefaultsizeof8KB.Afterinstallation，aperformanceproblemisidentified.Accordingtoperformancemonitoring，80%oftheimagesare16KB.Whichofthefollowingwillbestoptimizeperformance？（）
A.Change the stripe size on the RAID controller
B.Change the stripe size to 1024K on the RAID controller
C.Change the stripe size on the RAID controller for the first array
D.Change the stripe size on the RAID controller for the second array
