单项选择题
Refer to the exhibit. Router RTA has been configured as a DHCP server for router RTC. On thebasis of the information that is provided， which statement about DHCP is true？（）
A.The VLAN1-POOL argument must be issued for the Fa0/1 interface on router RTA
B.Router RTA must be configured with the default-router 192.168.3.2 DHCP command.
C.The ip address dhcp interface configuration command must be issued for the Fa0/1 interface ofrouter RTA
D.The ip helper-address 192.168.1.2 interface configuration command must be issued for theFa0/1 interface on router RTA
E.Router RTC must be configured with the ip address dhcp global configuration command
F.The lease 200 DHCP configuration command would change the default DHCP lease time to48 hours on router RTA
相关考题
-
多项选择题
Whenyouexecutethe"iphelper-address"commandonarouter，whichthreeUDPportsgetenabledautomaticallybydefault？（）
A.53（DNS）
B.69（TFTP）
C.515（LPR）
D.161（SNMP）
E.49（TACACS） -
单项选择题
WhatisthepurposeofconfiguringrouterR1withthe"IPHelperaddress"command？（）
A.IP Helper is used to direct BOOTP clients to a BOOTP server
B.IP Helper is used to prevent the router form forwarding IP broadcasts
C.IP Helper is used to allow IPX clients to communicate with IP-based servers
D.IP Helper is used to accommodate compatibility routers using different IP routing protocols
E.None of the other alternatives apply -
单项选择题
RIP and OSPF are configured on the routers as shown in the exhibit. R2 is configured with a two-way redistribution between RIP and OSPF domains. All routers can ping each other， but R1cannot see any of the OSPF routes in its routing table. What could the problem be？（）
A.OSPF and RIP use the same major network 172.16.0.0. Therefore， the keywordsubnets is notrequired to redistribute protocols into OSPF
B.Because OSPF has a longer mask for the same major network than RIP and because RIPversion 1 is being used， none of the routes learned from OSPF will be advertised into RIP
C.The metric for the OSPF routes that are redistributed into RIP is too low， a fact that preventsOSPF routes from being advertised into RIP
D.The process of redistribution of RIP into OSPF does not require any metric conversion， so thereis no need to define the metric using the default-metric command during the redistribution
