单项选择题
You want to connect your Windows 2000 Professional computer to multiple TCP/IP subnets on your company’s network. Your computer currently has an ISA network adapter installed. You install a second ISA network adapter. After you restart your computer， you notice that the second ISA network adapter is not functioning. What should you do？（）
A.Set the driver signing option to block.
B.Set the driver signing option to ignore.
C.In the computer’s BIOS， reserve an unused IRQ for ISA devices.
D.In the Device Manager， configure the second ISA network adapter to use an unused IRQ.
相关考题
-
单项选择题
Youhavea10Mbpsnetworkcardinyourcomputer.Youinstalla100Mbpsnetworkcardonyourcomputerandrestartthecomputer.The100Mbpscardinnotworkingduetoaconflictwiththe10Mbpscard.Youwantonlythe100Mbpscardtobeactive.Whatshouldyoudotodisablethe10Mbpsnetworkadapter？（）
A.Remove the 100MB Ethernet adapter driver by using device manager.
B.Remove the drivers for both Ethernet adapters cards by using device manager.
C.Install the 100MB Ethernet adapter in different PC card slots.
D.Disable the device drivers for the 10Mb card using by using Device Manager. -
单项选择题
YouareinstallingWindows2000Professionalon100MPScompliantcomputers.Youhavecreatedanimageofthiscomputerandcopiedtheimagetotwotestcomputers，whichhavetwoprocessorsinstalledonthem.Whenyourunthetestcomputers，youfindoutthatthesecondprocessoronboththecomputersisnotbeingused.Whatshouldyoudotoenablethesecondprocessor？（）
A.On your original machine use Device Manager\Computer\Properties\Drivers\Update Driver to install the correct multiprocessor HAL.
B.On the original computer, through the Add New Hardware, select the processor from the device list and install the required processor.
C.Download the patch from the motherboard manufacturer to allow the configuration of dual processors.
D.Reinstall Windows 2000 Professional on both the test computers. -
单项选择题
You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. Then you go to device manager to see the status of the USB port. The status of the USB port is shown below. What should you do to resolve this problem?()
A.Update the scanner drivers using certified drivers
B.Enable the USB port in the computers BIOS.
C.Contact the maker or vendor for you system and obtain the current version of BIOS.
D.Enable the USB hub controller in device manager.
