单项选择题
You have a 10Mbps network card in your computer. You install a 100Mbps network card on your computer and restart the computer. The 100Mbps card in not working due to a conflict with the10Mbps card. You want only the 100Mbps card to be active. What should you do to disable the10 Mbps network adapter？（）
A.Remove the 100MB Ethernet adapter driver by using device manager.
B.Remove the drivers for both Ethernet adapters cards by using device manager.
C.Install the 100MB Ethernet adapter in different PC card slots.
D.Disable the device drivers for the 10Mb card using by using Device Manager.
相关考题
-
单项选择题
YouareinstallingWindows2000Professionalon100MPScompliantcomputers.Youhavecreatedanimageofthiscomputerandcopiedtheimagetotwotestcomputers，whichhavetwoprocessorsinstalledonthem.Whenyourunthetestcomputers，youfindoutthatthesecondprocessoronboththecomputersisnotbeingused.Whatshouldyoudotoenablethesecondprocessor？（）
A.On your original machine use Device Manager\Computer\Properties\Drivers\Update Driver to install the correct multiprocessor HAL.
B.On the original computer, through the Add New Hardware, select the processor from the device list and install the required processor.
C.Download the patch from the motherboard manufacturer to allow the configuration of dual processors.
D.Reinstall Windows 2000 Professional on both the test computers. -
单项选择题
You have a computer running Windows 2000 Professional. You have purchased a new USB scanner. You attached it to the USB port. Then you go to device manager to see the status of the USB port. The status of the USB port is shown below. What should you do to resolve this problem?()
A.Update the scanner drivers using certified drivers
B.Enable the USB port in the computers BIOS.
C.Contact the maker or vendor for you system and obtain the current version of BIOS.
D.Enable the USB hub controller in device manager. -
单项选择题
YouhaveacomputerrunningWindows2000Professional.YouhavepurchasedanewUSBscanner.YouattachedittotheUSBport.WhenyougotodevicemanagertoseethestatusoftheUSBport，youfindaUSBcontrollertherebutwithayellowwarningiconnexttothehostcontrollername.Whatshouldyoudotoresolvethisproblem？（）
A.Update the scanner drivers using certified drivers
B.Enable the USB port in the computers BIOS again.
C.Contact the maker or vendor for you system and obtain the current version of BIOS.
D.Enable the USB hub controller in device manager.
